High Consistency Cleaner For Paper Pulp Mill

The cleaner is a device that uses the centrifugal principle to remove impurities with a different density in the slurry. The upper part of the cleaner is made of stainless steel, and the lower part is injection molded of polyurethane material. The inner wall of the main body is a spiral cone design.
The cleaner can be used in various slurry purification systems, mainly to remove heavy impurities such as sand and iron filings in the slurry with a density greater than the slurry (heavy slag remover) and mixed stickies and paraffins with a density less than the slurry , Hot melt glue, plastic sheet, foam, gas, ink particles and other light impurities (lightweight cleaner).

The high-concentration cleaner is an ideal equipment used to remove various heavy impurities such as metals and sand in the pulp at a higher concentration to obtain high-quality pulp. It is also an essential equipment for the purification of waste paper pulp.

Working principle: Separate waste impurities from fibers by centrifugal force.
When the pulp enters the top of the slag remover from the tangential direction, the slurry flow produces a vortex movement, which accelerates downward along the cone of the slag remover in a spiral shape. The movement of the vortex generates centrifugal force, which causes the impurities heavier than water to move to the inner wall of the slag remover, while those with a relative density less than water move to the core of the vortex.